SQ FT
792
BED
1
BATH
1.0
GARAGE
0
FLOORS
1
FOUNDATION
Slab/Pier

Plan C-25-113: 24'x33' Small Cabin House Plan 1 Bed 1 Bath, 792 sq ft

Original price $499.00
$449.00 SALE

PDF + CAD/DWG + RVT + SKP · All formats included

Instant Download
Full Plan Set
Customisation
Live Help
Secure Checkout & Instant Download
AMEX PayPal G Pay Pay
Compact small cabin floor plan with 1 bed, 1 bath, open great room, kitchen, dining, laundry, front porch, and corrugated metal gable roof on a slab with pier foundation. 792 sq ft.

About This Plan

This 24'x33' small cabin floor plan delivers 792 sq ft of single-story living in a tight, efficient layout that makes the most of every square foot. The open great room at 11'x13'5" connects directly to the kitchen at 11'x13'5" and dining area at 11'x6'4", creating a continuous living zone that feels spacious well beyond its footprint. The bedroom at 10'x11' sits at the back of the plan with a dedicated bathroom at 5'x7'6", and a laundry room at 4'x11' with washer and dryer hookups keeps utility functions contained. A covered front porch at 12'x7' provides a welcoming outdoor space and adds cabin character to the entry. The layout is clean and functional with no wasted circulation, ideal for a solo owner, couple, or vacation property buyer looking for a low-cost build with full amenity.

Built on a concrete slab with pier footings, this plan uses 2x6 wood framing throughout with cedar tongue and groove siding on a rain screen assembly. The gable roof is clad in black corrugated metal, and the foundation detail includes closed cell SPF insulation, termite shield, and perimeter drainage. The compact 24-foot width makes this plan well suited to narrow lots, tight sites, and rural properties where a small footprint is a priority. The single-story layout requires no stairs and keeps construction straightforward for owner-builders.

Whether you are planning a vacation retreat, a rental cabin, a primary residence, or an accessory dwelling unit, this complete 22-sheet drawing set gives you everything needed to begin construction. Sheets cover the floor plan, slab layout with load-bearing walls, ceiling and roof outlines, all four elevations, two sections, electrical and plumbing plans, kitchen and bath details, rafter and insulation details, window and door schedule, foundation details, and a full material list. Home Plan DIY does not provide engineer-stamped plans; buyers should verify local engineering and code compliance requirements independently. Some jurisdictions require a licensed architect or engineer to review and seal plans prior to construction. Available as an instant PDF and CAD download.

Details

Heated SQ FT
Total Heated Area 792 sq ft
First Floor 792 sq ft
Porch & Patio SQ FT
Total Porch/Patio Area 84 sq ft
Front Porch 84 sq ft
Bedrooms 1
Full Baths 1
Floors 1
Width 24 ft
Depth 33 ft
Height 17 ft 10 in
Foundation Slab/Pier
Exterior Framing 2x6
Ceiling Heights
First Floor 9 ft

What's Included in These Plans?

  • Complete Architectural Floor Plans
  • Loft & Open Living Space Layouts
  • Roof, Ceiling & Building Section Drawings
  • Exterior Elevations from All Sides
  • Kitchen & Bathroom Construction Details
  • Door, Window & Opening Schedules
  • Electrical & Plumbing Layout Plans
  • Wall, Rafter & Foundation Details
  • Material List for Construction Planning
  • Builder-Ready House Blueprints in PDF Format

What's Not Included

Site work, Landscaping, Permits, Utility connections, Appliances, Furniture . Some jurisdictions require a local engineer to review and stamp the plans. Check with your local building department before construction. . Some jurisdictions require a local engineer to review and stamp the plans. Check with your local building department before construction.

Estimated Build Cost

Range
$102,960 to $174,240
Per sq ft
$130 to $220

Final costs may vary significantly based on local market conditions, foundation requirements, utility connections, permits, and customization options. For the most accurate pricing, we recommend sharing the included plans and material list with local contractors or builders for detailed quotations.

Need Modifications?

Change garage size, room layout, foundation type, or dimensions. Get a quote before you buy.

Common Questions

Can I use this to get a building permit?

Yes — these are full construction documents. Some jurisdictions require a local engineer stamp. Check with your building department first.

What file formats are included?

PDF, CAD/DWG, RVT (Revit), and SKP (SketchUp) — all in one download link sent instantly after purchase.

Is an engineer stamp included?

No. Plans must be reviewed by a licensed local engineer before construction. Building codes vary by location.

Can I modify the plan myself?

Yes — CAD and Revit files are fully editable. Or we can do it for you — see modifications above.