SQ FT
1100
BED
2
BATH
2.0
GARAGE
0
FLOORS
1
FOUNDATION
Pier

Plan C-25-115: 44'x25' Modern Farmhouse Floor Plan 2 Bed 2 Bath, 1,100 sq ft

Original price $499.00
$89.00 SALE

PDF + CAD/DWG + RVT + SKP · All formats included

Instant Download
Full Plan Set
Customisation
Live Help
Secure Checkout & Instant Download
AMEX PayPal G Pay Pay
Modern farmhouse floor plan with 2 beds, 2 baths, open kitchen/dining, mud room, walk-in closet, and cedar siding on a concrete pier foundation. 1,100 sq ft.

About This Plan

This 44'x25' modern farmhouse floor plan delivers 1,100 sq ft of single-story living across a clean, well-organized layout designed for comfort and functionality. The open kitchen and dining area spans 18'x11' and flows naturally into the living room at 12'x11', creating a bright, connected common space suited to everyday living and entertaining. Bedroom 1 measures 12'x11' with a dedicated walk-in closet and direct access to the master bath, while Bedroom 2 at 10'x12' sits on the opposite side of the home near a full bath and a practical drop zone and mud room with bench and cubbies. A laundry closet with dryer and washer hookups and a separate linen and storage room round out a layout that prioritizes daily function without wasted space.

The home is built on a drilled concrete pier foundation with 2x6 wood framing throughout. The gable roof is clad in black corrugated metal, and exterior walls feature cedar tongue and groove siding with a rain screen assembly for long-term durability. Interior finishes shown in the material list include pale oak hardwood flooring, ivory tile in wet areas, and a cedar T&G ceiling detail at the roofline. The single-story footprint keeps construction straightforward and the home accessible for a wide range of buyers including retirees, couples, and owner-builders working with a modest budget.

Whether you are planning a primary residence, vacation home, rental cabin, or accessory dwelling unit, this complete 22-sheet drawing set gives you everything needed to begin construction. Sheets cover the floor plan, slab layout with load-bearing walls, ceiling and roof outlines, all four elevations, two sections, electrical and plumbing plans, kitchen and bath details, rafter and insulation details, window and door schedule, footing details, and a full material list. Home Plan DIY does not provide engineer-stamped plans; buyers should verify local engineering and code compliance requirements independently. Some jurisdictions require a licensed architect or engineer to review and seal plans prior to construction. Available as an instant PDF and CAD download.

Details

Heated SQ FT
Total Heated Area 1100 sq ft
First Floor 1,100 sq ft
Bedrooms 2
Full Baths 2
Floors 1
Width 44 ft
Depth 25 ft
Height 16 ft 5 in
Foundation Pier
Exterior Framing 2x6
Ceiling Heights
First Floor 9 ft 9 in

What's Included in These Plans?

  • Complete Architectural Floor Plans
  • Loft & Open Living Space Layouts
  • Roof, Ceiling & Building Section Drawings
  • Exterior Elevations from All Sides
  • Kitchen & Bathroom Construction Details
  • Door, Window & Opening Schedules
  • Electrical & Plumbing Layout Plans
  • Wall, Rafter & Foundation Details
  • Material List for Construction Planning
  • Builder-Ready House Blueprints in PDF Format

What's Not Included

Site work, Landscaping, Permits, Utility connections, Appliances, Furniture . Some jurisdictions require a local engineer to review and stamp the plans. Check with your local building department before construction. . Some jurisdictions require a local engineer to review and stamp the plans. Check with your local building department before construction.

Estimated Build Cost

Range
$143,000 to $242,000
Per sq ft
$130 to $220

Final costs may vary significantly based on local market conditions, foundation requirements, utility connections, permits, and customization options. For the most accurate pricing, we recommend sharing the included plans and material list with local contractors or builders for detailed quotations.

Need Modifications?

Change garage size, room layout, foundation type, or dimensions. Get a quote before you buy.

Common Questions

Can I use this to get a building permit?

Yes — these are full construction documents. Some jurisdictions require a local engineer stamp. Check with your building department first.

What file formats are included?

PDF, CAD/DWG, RVT (Revit), and SKP (SketchUp) — all in one download link sent instantly after purchase.

Is an engineer stamp included?

No. Plans must be reviewed by a licensed local engineer before construction. Building codes vary by location.

Can I modify the plan myself?

Yes — CAD and Revit files are fully editable. Or we can do it for you — see modifications above.