SQ FT
750
BED
1
BATH
1.0
GARAGE
0
FLOORS
1
FOUNDATION
Slab/Pier

Plan-C-25-183: 30'x25' Modern Tiny Cabin Floor Plan 1 Bed 1 Bath, 750 sq ft

$449.00

Pdf & CAD

Instant Download
Full Plan Set
Customisation
Live Help
Secure Checkout & Instant Download
AMEX PayPal G Pay Pay
30x25 modern tiny cabin plan with 1 bed, 1 bath, vaulted ceiling, open living, large covered front porch, and steep gable metal roof. 750 sq ft. PDF and CAD.

About This Plan

This 30'x25' modern tiny cabin floor plan delivers 750 sq ft of open, light-filled single-story living space beneath a steep gable roof with soaring 13 ft vaulted ceilings and cedar tongue and groove ceiling details. The layout divides the interior into two equal halves: a generous open living area on one side and a private bedroom on the other, with a full bath, washer/dryer, and ample storage tucked between them. A full-width 30 ft covered front porch adds outdoor living space that nearly doubles the functional footprint, making this plan feel far larger than its square footage suggests. Large fixed and sliding windows bring natural light deep into both the living area and bedroom.

The steep gable roofline gives this cabin a bold, traditional-modern silhouette that pairs well with corrugated metal roofing and cedar tongue and groove ceiling details. Built on a slab and drilled concrete pier foundation with 2x4 wood framing, this home is designed for durability and straightforward DIY construction on a wide range of sites. The single-story layout with vaulted interior makes it equally suited to primary living, short-term rentals, vacation cabins, and retirement downsizing.

Whether you are planning a weekend retreat, a primary residence, or an income-generating rental cabin, this complete 23-sheet drawing set gives you everything needed to begin construction. Sheets cover the ground floor plan, loft plan, slab layout showing load-bearing walls, sections, ceiling outline, roof outline, all four elevations, kitchen and bath details, rafter details, wall and window details, exterior wall and foundation details, door and window schedule, framing details, electrical plan, plumbing plan, insulation details, and a full material list. Available as an instant PDF and CAD download. Home Plan DIY does not provide engineer-stamped plans. Buyers are responsible for verifying local engineering and code compliance requirements. Some jurisdictions require a licensed architect or engineer to review and seal plans prior to construction.

Details

Heated SQ FT
Total Heated Area 750 sq ft
First Floor 750 sq ft
Porch & Patio SQ FT
Total Porch/Patio Area 248 sq ft
Front Porch 30'x8'3"
Bedrooms 1
Full Baths 1
Half Baths 0
Floors 1
Width 30 ft
Depth 25 ft 3 in
Height 21 ft 6 in
Foundation Slab/Pier
Main Roof Pitch 10:12
Exterior Framing 2x4
Ceiling Heights
First Floor 13 ft

What's Included in These Plans?

  • Complete Architectural Floor Plans
  • Loft & Open Living Space Layouts
  • Roof, Ceiling & Building Section Drawings
  • Exterior Elevations from All Sides
  • Kitchen & Bathroom Construction Details
  • Door, Window & Opening Schedules
  • Electrical & Plumbing Layout Plans
  • Wall, Rafter & Foundation Details
  • Material List for Construction Planning
  • Builder-Ready House Blueprints in PDF Format

What's Not Included

Site work, Landscaping, Permits, Utility connections, Appliances, Furniture . Some jurisdictions require a local engineer to review and stamp the plans. Check with your local building department before construction. . Some jurisdictions require a local engineer to review and stamp the plans. Check with your local building department before construction.

Estimated Build Cost

Range
$97,500 to $165,000
Per sq ft
$130 to $220

Final costs may vary significantly based on local market conditions, foundation requirements, utility connections, permits, and customization options. For the most accurate pricing, we recommend sharing the included plans and material list with local contractors or builders for detailed quotations.

Need Modifications?

Change garage size, room layout, foundation type, or dimensions. Get a quote before you buy.

Request a Modification →

Common Questions

Can I use this to get a building permit?

Yes — these are full construction documents. Some jurisdictions require a local engineer stamp. Check with your building department first.

What file formats are included?

PDF, CAD/DWG, RVT (Revit), and SKP (SketchUp) — all in one download link sent instantly after purchase.

Is an engineer stamp included?

No. Plans must be reviewed by a licensed local engineer before construction. Building codes vary by location.

Can I modify the plan myself?

Yes — CAD and Revit files are fully editable. Or we can do it for you — see modifications above.