SQ FT
800
BED
2
BATH
1.0
GARAGE
0
FLOORS
1
FOUNDATION
Slab/Pier

Plan C-25-185: 32'x25' Modern Cottage House Plan 2 Bed 1 Bath, 800 sq ft

$449.00

PDF + CAD/DWG + RVT + SKP · All formats included

Instant Download
Full Plan Set
Customisation
Live Help
Secure Checkout & Instant Download
AMEX PayPal G Pay Pay
Compact 32x25 modern cottage plan with 2 bedrooms, 1 bath, open kitchen and living area, front porch, and cross gable metal roof. 800 sq ft. PDF and CAD included.

About This Plan

This 32'x25' modern cottage floor plan delivers 800 sq ft of well-organized single-story living space under a bold cross gable roof with cedar tongue and groove ceiling details. The layout positions the kitchen and open living area along the front of the plan, with two generously sized bedrooms, a full bath, linen closet, and stacked washer/dryer tucked toward the rear. Large fixed and sliding windows bring in natural light throughout, and a covered front porch with stairs adds functional outdoor living space without expanding the overall footprint. The two-bedroom configuration makes this plan a strong fit for couples, small families, vacation home buyers, and short-term rental investors looking for an efficient build.

The cross gable roofline gives this cottage a distinctive, traditional-modern profile that pairs naturally with corrugated metal roofing and cedar tongue and groove ceiling details. Built on a slab and drilled concrete pier foundation with 2x4 wood framing, this plan is designed for straightforward construction on a wide range of site types. The single-story layout keeps the build cost accessible and makes the home suitable for buyers of all ages, including retirees and accessibility-conscious owners.


Whether you are planning a primary residence, a vacation cabin, a guest house, or a short-term rental, this complete 23-sheet drawing set gives you everything needed to begin construction. Sheets cover the ground floor plan, loft plan, slab layout showing load-bearing walls, sections, ceiling outline, roof outline, all four elevations, kitchen and bath details, rafter details, wall and window details, exterior wall and foundation details, door and window schedule, framing details, electrical plan, plumbing plan, insulation details, and a full material list. Available as an instant PDF and CAD download. Home Plan DIY does not provide engineer-stamped plans. Buyers are responsible for verifying local engineering and code compliance requirements. Some jurisdictions require a licensed architect or engineer to review and seal plans prior to construction.

Details

Heated SQ FT
Total Heated Area 800 sq ft
First Floor 800 sq ft
Bedrooms 2
Full Baths 1
Half Baths 0
Floors 1
Width 32 ft
Depth 25 ft
Height 19 ft 9 in
Foundation Slab/Pier
Main Roof Pitch 9:12
Exterior Framing 2x4
Ceiling Heights
First Floor 9 ft

What's Included in These Plans?

  • Complete Architectural Floor Plans
  • Loft & Open Living Space Layouts
  • Roof, Ceiling & Building Section Drawings
  • Exterior Elevations from All Sides
  • Kitchen & Bathroom Construction Details
  • Door, Window & Opening Schedules
  • Electrical & Plumbing Layout Plans
  • Wall, Rafter & Foundation Details
  • Material List for Construction Planning
  • Builder-Ready House Blueprints in PDF Format

What's Not Included

Site work, Landscaping, Permits, Utility connections, Appliances, Furniture . Some jurisdictions require a local engineer to review and stamp the plans. Check with your local building department before construction. . Some jurisdictions require a local engineer to review and stamp the plans. Check with your local building department before construction.

Estimated Build Cost

Range
$104,000 to $176,000
Per sq ft
$130 to $220

Final costs may vary significantly based on local market conditions, foundation requirements, utility connections, permits, and customization options. For the most accurate pricing, we recommend sharing the included plans and material list with local contractors or builders for detailed quotations.

Need Modifications?

Change garage size, room layout, foundation type, or dimensions. Get a quote before you buy.

Common Questions

Can I use this to get a building permit?

Yes — these are full construction documents. Some jurisdictions require a local engineer stamp. Check with your building department first.

What file formats are included?

PDF, CAD/DWG, RVT (Revit), and SKP (SketchUp) — all in one download link sent instantly after purchase.

Is an engineer stamp included?

No. Plans must be reviewed by a licensed local engineer before construction. Building codes vary by location.

Can I modify the plan myself?

Yes — CAD and Revit files are fully editable. Or we can do it for you — see modifications above.