SQ FT
1170
BED
3
BATH
2.0
GARAGE
0
FLOORS
1
FOUNDATION
Slab/Pier

Plan C-25-184: 45'x26' Modern Farmhouse Floor Plan 3 Bed 2 Bath, 1170 sq ft

Original price $549.00
$449.00 SALE

PDF + CAD/DWG + RVT + SKP · All formats included

Instant Download
Full Plan Set
Customisation
Live Help
Secure Checkout & Instant Download
AMEX PayPal G Pay Pay
45x26 modern farmhouse plan with 3 beds, 2 baths, open kitchen and living, clearstory roof, front and rear covered porches. 1,170 sq ft. PDF and CAD included.

About This Plan

This 45'x26' modern farmhouse floor plan delivers 1,170 sq ft of single-story living space with a layout that balances privacy and openness across three bedrooms and two full baths. The open kitchen and living area anchor the center of the plan, with a large master suite on one end featuring a private bath and closet, and a secondary bedroom and shared bath on the other. A dedicated laundry room with washer and dryer, a mechanical room, and two full-width covered porches front and rear round out a plan that lives well beyond its modest footprint. Clearstory windows rise above the roofline to bring additional light and volume into the main living space.

The cross gable roof with clearstory is the defining feature of this plan, giving the farmhouse a bold silhouette with a modern twist while keeping construction approachable for DIY and owner-builder projects. Built on a slab and drilled concrete pier foundation with 2x4 wood framing, corrugated metal roofing, and cedar tongue and groove ceiling details, this home is designed for durability and low maintenance. The single-story layout makes it accessible for a wide range of buyers including retirees, families, and rural property owners.

Whether you are planning a primary residence, a vacation home, a rental property, or a rural retreat, this complete 23-sheet drawing set gives you everything needed to begin construction. Sheets cover the ground floor plan, loft plan, slab layout showing load-bearing walls, sections, ceiling outline, roof outline, all four elevations, kitchen and bath details, rafter details, wall and window details, exterior wall and foundation details, door and window schedule, framing details, electrical plan, plumbing plan, insulation details, and a full material list. Available as an instant PDF and CAD download. Home Plan DIY does not provide engineer-stamped plans. Buyers are responsible for verifying local engineering and code compliance requirements. Some jurisdictions require a licensed architect or engineer to review and seal plans prior to construction.

Details

Heated SQ FT
Total Heated Area 1170 sq ft
First Floor 1,170 sq ft
Porch & Patio SQ FT
Total Porch/Patio Area 280 sq ft
Front Porch 28'x5'6"
Bedrooms 3
Full Baths 2
Half Baths 0
Floors 1
Width 45 ft
Depth 26 ft
Height 19 ft 3 in
Foundation Slab/Pier
Main Roof Pitch 9:12
Exterior Framing 2x4
Ceiling Heights
First Floor 9 ft

What's Included in These Plans?

  • Complete Architectural Floor Plans
  • Loft & Open Living Space Layouts
  • Roof, Ceiling & Building Section Drawings
  • Exterior Elevations from All Sides
  • Kitchen & Bathroom Construction Details
  • Door, Window & Opening Schedules
  • Electrical & Plumbing Layout Plans
  • Wall, Rafter & Foundation Details
  • Material List for Construction Planning
  • Builder-Ready House Blueprints in PDF Format

What's Not Included

Site work, Landscaping, Permits, Utility connections, Appliances, Furniture . Some jurisdictions require a local engineer to review and stamp the plans. Check with your local building department before construction. . Some jurisdictions require a local engineer to review and stamp the plans. Check with your local building department before construction.

Estimated Build Cost

Range
$152,100 to $257,400
Per sq ft
$130 to $220

Final costs may vary significantly based on local market conditions, foundation requirements, utility connections, permits, and customization options. For the most accurate pricing, we recommend sharing the included plans and material list with local contractors or builders for detailed quotations.

Need Modifications?

Change garage size, room layout, foundation type, or dimensions. Get a quote before you buy.

Common Questions

Can I use this to get a building permit?

Yes — these are full construction documents. Some jurisdictions require a local engineer stamp. Check with your building department first.

What file formats are included?

PDF, CAD/DWG, RVT (Revit), and SKP (SketchUp) — all in one download link sent instantly after purchase.

Is an engineer stamp included?

No. Plans must be reviewed by a licensed local engineer before construction. Building codes vary by location.

Can I modify the plan myself?

Yes — CAD and Revit files are fully editable. Or we can do it for you — see modifications above.