Home2 Bedroom House Plans› Plan 26127-RS
PLAN 26127-RS · MODERN CABIN

Modern Cabin House Plan, 2 Bed 2 Bath With Front Porch

39+ downloads
1200sq ft
2bed
2bath
40x30footprint
Noloft
Choose your plan package
Popular add-ons
$389.00Code BUILD20 saves 20% at checkout
⚡ Sale code BUILD20 applies at checkout
Instant deliverySecure checkoutLifetime access
  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Full specifications

Plan number26127-RS
StyleModern Cabin
Heated area1200 sq ft (ANSI Z765)
Floors1
Garage detailNone
Design standard2021/2022 IRC with amendments
Files deliveredPrint-ready PDF + editable CAD (.dwg)
LicenseSingle-use construction license
DeliveryInstant download + email, lifetime re-download

About this house plan

This 40x30 modern cabin house plan delivers 1,200 sq ft of heated living space on a single level, with two bedrooms, two full bathrooms and a covered front porch that runs the entire 40 ft width of the house. There are no stairs and no loft, so every square foot of the plan is usable living space rather than circulation, and a steep 9:12 gable roof over nine-foot ceilings gives the house a presence that a 1,200 sq ft footprint usually cannot buy.

The front door opens straight into a 14'0" x 14'0" living room that shares one open volume with a 14'0" x 15'0" kitchen, where an island seats four and a walk-in pantry measuring 4'0" x 6'0" sits just off the prep zone. The master suite occupies one end of the house: a 12'0" x 13'6" bedroom, a 12'0" x 8'0" bathroom with a double vanity and a walk-in shower, and a 12'0" x 6'6" walk-in closet. The second bedroom, 12'0" x 11'0" with its own closet, sits at the opposite end beside a 7'6" x 8'6" bathroom with a tub, so guests and children are never sharing a wall with the primary suite. A 12'0" x 4'0" side foyer, a dedicated 6'6" x 4'6" laundry room, a 5'0" x 4'0" mechanical room and two linen closets absorb the storage and utility load that usually crowds a small house.

Construction is wood stud framing with insulated six-inch exterior walls under a nine-inch insulated roof assembly finished in asphalt shingle, carried on twenty-three structural 6x6 wood columns. The house sits on a six-inch concrete slab poured over twelve-inch concrete foundation walls with 36 in x 12 in bearing footings, which keeps site prep simple and pouring costs predictable on a flat or gently graded lot. The main roof runs at a 9:12 pitch and drops to 3:12 over the porch, the finished floor sits 18 inches above grade, and the ridge reaches 23 ft 6 in. Electrical is specified around a 200A panel with dedicated 240V circuits for HVAC, dryer and range, and plumbing runs PEX or copper supply to water-conserving fixtures served by a 40-gallon water heater.

The plan suits vacation and lake cabin builds where a deep covered porch does most of the entertaining, short-term rental owners who need a genuine primary suite separated from the guest bedroom, downsizers and anyone planning for single-level living without stairs, and first-time owner-builders who want a simple rectangle, a slab pour and a straightforward gable rather than a complicated roof.

Local codes and site conditions vary. This design is prepared to current residential, plumbing and electrical code standards, but a licensed architect or structural engineer in your jurisdiction should review and, where required, seal the plans before you apply for a building permit. Please confirm requirements with your local building department before purchasing or starting construction.

What will it cost to build?

Pick your state or set your own rate. We'll estimate from this plan's 1200 sq ft.

$90/sq ft · owner-builder$125/sq ft$250/sq ft · high finish
$0
Estimated construction cost (±15%) · excludes land, site work & permits. Owner-builders doing their own labor routinely come in 20–40% under.

Building codes & your state

Please read before ordering. Our plans are drawn to 2021/2022 IRC standards. They do not include site-specific earthquake seismic or wind engineering (CA, OR, WA, NV residents take note). Coastal GA, SC & NC may require hurricane/wind engineering. Many states (incl. FL, NY, NJ, CO, PA and others) may require a locally licensed engineer or architect to review and seal plans before permitting. Call your local building department before placing your order, and remember our editable CAD files are designed to make that local review fast and inexpensive. Need help? Our engineering-stamp coordination service connects you with a licensed professional in your state.

Need changes? We modify any plan.

Move a wall. Add a garage. Flip the layout.

Send us your changes; most modification quotes come back within 24 hours.

Request a modification quote

Customer feedback

You may also like

Plan 26127-RS
$389.00