Home1 Bedroom House Plans› Plan 25112
PLAN 25112 · HOME PLAN BLUEPRINT

24x20 Small Cabin House Plan – 1 Bed Tiny Home Blueprint

63+ downloads
602sq ft
1bed
1.0bath
24'x20'footprint
Noloft
Choose your plan package
Popular add-ons
$449.00Code BUILD20 saves 20% at checkout
⚡ Sale code BUILD20 applies at checkout
Instant deliverySecure checkoutLifetime access
  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

What's included in this house plan?

A complete working drawing set, delivered as a print-ready PDF at A0 sheet size (33.1 x 46.8 in).

  • Complete Architectural Floor Plans
  • Loft & Open Living Space Layouts
  • Roof, Ceiling & Building Section Drawings
  • Exterior Elevations from All Sides
  • Kitchen & Bathroom Construction Details
  • Door, Window & Opening Schedules
  • Electrical & Plumbing Layout Plans
  • Wall, Rafter & Foundation Details
  • Material List for Construction Planning
  • Builder-Ready House Blueprints in PDF Format

Full specifications

Plan number25112
StyleHome Plan Blueprint
Heated area602 sq ft (ANSI Z765)
Width and depth24'x20'
Floors1
Roof styleGable
Framing2x6
Garage detailNone
Covered porches96 sq ft
FoundationSlab/Pier
Design standard2021/2022 IRC with amendments
Files deliveredPrint-ready PDF + editable CAD (.dwg)
LicenseSingle-use construction license
DeliveryInstant download + email, lifetime re-download

About this house plan

This 24x20 small cabin house plan delivers 480 square feet of smart, open living in a clean modern-rustic package, built around a gable roof, corrugated metal roofing, and deep blue-green lap siding with a full-width covered front porch. It reads as a proper little home rather than a shed, with one comfortable bedroom, a full bathroom, and a bright great room that makes the compact footprint feel open and genuinely livable.

Inside, the layout puts space where it counts. The open living and dining area runs 12'7" by 15'2", with room for a real sofa, a dining table, and clear sightlines through to the kitchen, which sits along one wall and shares that same open zone. The single bedroom measures 10'2" by 9'5" and fits a queen bed with room to move around it, while the full bath runs 10'2" by 5'4" with a shower, toilet, and vanity. The covered porch spans the full 24-foot front at 4 feet deep and includes an entry stair, so you get a real outdoor sitting spot instead of a token step at the door.

On the construction side, the cabin sits on a pier and beam foundation with 8-inch concrete post footings and drilled, rebar-reinforced piers, which makes it a strong choice for sloped or raised sites and keeps the floor framing well ventilated. Walls are framed with 2x6 wood studs and insulated at the wall, floor, and ceiling. The gable roof is built with 2x6 and 2x10 rafters, finished in corrugated metal over cedar tongue and groove, with the building topping out at 16 feet 9 inches. The systems are fully specified too, including GFCI-protected receptacles, interconnected smoke detectors, Type M copper water supply, and PVC drain and vent piping.

The size and single-level layout make this a natural fit for a lot of projects. It works as an ADU or backyard guest house, a short-term or long-term rental unit, or a downsizing home for empty nesters who want everything on one floor. It's just as suited to first-time owner-builders who want something achievable but still fully detailed, and it makes an excellent off-grid getaway, lake or hunting cabin, or a quiet home office studio out back.

These drawings are prepared to residential code standards and are not sealed or engineered for every state. Local building departments often require an engineer's review for seismic, wind, or foundation loads, so please confirm requirements with your local permit office before you build.

What will it cost to build?

Pick your state or set your own rate. We'll estimate from this plan's 602 sq ft.

$90/sq ft · owner-builder$125/sq ft$250/sq ft · high finish
$0
Estimated construction cost (±15%) · excludes land, site work & permits. Owner-builders doing their own labor routinely come in 20–40% under.

Building codes & your state

Please read before ordering. Our plans are drawn to 2021/2022 IRC standards. They do not include site-specific earthquake seismic or wind engineering (CA, OR, WA, NV residents take note). Coastal GA, SC & NC may require hurricane/wind engineering. Many states (incl. FL, NY, NJ, CO, PA and others) may require a locally licensed engineer or architect to review and seal plans before permitting. Call your local building department before placing your order, and remember our editable CAD files are designed to make that local review fast and inexpensive. Need help? Our engineering-stamp coordination service connects you with a licensed professional in your state.

Need changes? We modify any plan.

Move a wall. Add a garage. Flip the layout.

Send us your changes; most modification quotes come back within 24 hours.

Request a modification quote

Customer feedback

You may also like

Plan 25112
$449.00